Inner Tie Rod - TRW or CAM Rack - 700

Ball joints and tie rods are key components in your Volvo's front suspension and steering system. Since the late 1960's, the ball joints on most Volvos have been of the lifetime design, i.e. no grease fittings for lubrication.

Under normal conditions they can last for over 100,000 miles. When abused or used in unusually rough road conditions the life span can be greatly reduced. When a ball joint or tie rod begins to wear it will usually increase the amount of effort required to steer the car.

Once wear has started, these parts usually will deteriorate rapidly as the load generated by the suspension and transferred through the ball joints and tie rods is very great. Typically you will begin to notice some looseness in the steering or you may notice that your Volvo has a difficult time holding a straight line down the road.

Although the parts aren't terribly difficult to inspect, you should have a good workshop manual handy for reference. If you suspect you've got a problem in the front end, make a point of inspecting these parts soon.
 

Product Fitment Notes & Potential Issues

700 models came with a couple different brand steering racks installed from the factory. In addition, many of these cars have had steering racks swapped, and many times not with the same style rack.

This inner tie rod fits 700 models with TRW or CAM brand steering rack and male threads on the inboard end.

This inner tie rod is generally found on 1983-1988 700 models. To ensure correct ordering, please verify what is currently equipped on your car.