Vacuum Elbow Kit
Aftermarket - 109424
Product Description
There are two vacuum elbows used on 850 and later models that fit in a variety of different places.
Our kit includes the elbows that most commonly get soft and fail over time. The elbow that is different sizes on each end is used primarily in two locations. First, the nipple located on the pass side of the intake manifold behind the power steering pump & second on the intake tube right after the mass air flow sensor. The elbow on the intake manifold is used on 850s that were built Oct 95 and later and the 70 series up to 2000 (check your vehicle to be sure).
The other elbow is found on the air injection pump valve vacuum line and solenoid, four are used in that system, and also found on vacuum tree under the throttle bell crank cover. Look for code "232 LT FT" caused by elbow air leaks.
Product Fitment Notes & Potential Issues
There are 2 kits used on 1995 850 models. This kit fits models built September 1995 (09/95) and earlier.
To ensure correct part order, please inspect the build date on the VIN sticker if you own a 1995 model.
Technical Tips & Articles
About Aftermarket
At IPD, we have a basket of trusted "Aftermarket" brands we pull from for fast-moving items, so we're able to get customers the right part for the job from any available source. Our Aftermarket brand umbrella covers many brands you're familiar with, like: APA ÜRO, CRP, Rein, TYC, Professional Parts Sweden, MTC, Fel-Pro, FAE, KAE-Kaehler, Fram, ProTech, Nissens, Standard Ignition Products, Centric, Beck/Arnley, and more!
We pick brands with a balance of good quality and good value; we trust these brands on our own cars, and we hope you will too!
Printable Instructions & Downloads
Vehicle Fitment Guide
Year | Make | Model | Trim | Chassis | Bodystyle | Engine | Fuelsys | Drive | Transmission |
---|---|---|---|---|---|---|---|---|---|
1995 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | ME4.3 | FWD | AW50-42 |
1995 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | LH 3.2 | FWD | M56 |
1995 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | ME4.3 | FWD | M56 |
1995 | VOLVO | 850 | NON-TURBO | P80 | 5 DR WAGON | B5254FS | ME4.3 | FWD | AW50-42 |
1995 | VOLVO | 850 | NON-TURBO | P80 | 5 DR WAGON | B5254FS | LH 3.2 | FWD | M56 |
1995 | VOLVO | 850 | NON-TURBO | P80 | 5 DR WAGON | B5254FS | ME4.3 | FWD | M56 |
1995 | VOLVO | 850 | R | P80 | 4 DR SEDAN | B5234FT | ME4.3 | FWD | AW50-42 |
1995 | VOLVO | 850 | R | P80 | 5 DR WAGON | B5234FT | ME4.3 | FWD | AW50-42 |
1995 | VOLVO | 850 | TURBO | P80 | 4 DR SEDAN | B5234FT | ME4.3 | FWD | AW50-42 |
1995 | VOLVO | 850 | TURBO | P80 | 5 DR WAGON | B5234FT | ME4.3 | FWD | AW50-42 |
1994 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | LH 3.2 | FWD | AW50-42 |
1994 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | LH 3.2 | FWD | M56 |
1994 | VOLVO | 850 | NON-TURBO | P80 | 5 DR WAGON | B5254FS | LH 3.2 | FWD | AW50-42 |
1994 | VOLVO | 850 | NON-TURBO | P80 | 5 DR WAGON | B5254FS | LH 3.2 | FWD | M56 |
1994 | VOLVO | 850 | TURBO | P80 | 4 DR SEDAN | B5234FT | ME4.3 | FWD | AW50-42 |
1994 | VOLVO | 850 | TURBO | P80 | 4 DR SEDAN | B5234FT | ME4.3 | FWD | M56 |
1994 | VOLVO | 850 | TURBO | P80 | 5 DR WAGON | B5234FT | ME4.3 | FWD | AW50-42 |
1994 | VOLVO | 850 | TURBO | P80 | 5 DR WAGON | B5234FT | ME4.3 | FWD | M56 |
1993 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | LH 3.2 | FWD | AW50-42 |
1993 | VOLVO | 850 | NON-TURBO | P80 | 4 DR SEDAN | B5254FS | LH 3.2 | FWD | M56 |
Shipping Estimate
Product Reviews
Policies, Warranty & FAQ
Product Fitment Notes & Potential Issues
There are 2 kits used on 1995 850 models. This kit fits models built September 1995 (09/95) and earlier.
To ensure correct part order, please inspect the build date on the VIN sticker if you own a 1995 model.
Available to Order means the item may not be in our warehouse but is readily available from one or more supplier warehouses. After you order it, we will get it for you ASAP.
Products from major brand names are almost always in stock in the manufacturer’s domestic warehouse. These suppliers have good fill rates, but even if they are out of stock, we may be able to source it from a variety of alternative wholesale sources.
We are at the most a week away from all these warehouses, usually much less. Does that mean we will always have your product available within that window? Honestly, we can't promise that but we’ll do everything we can to get your parts to you in a timely manner.