Billet Aluminum Magnetic Oil Drain Plug + Drain Plug Socket Kit
IPD Kit Builder - K23888
- Deselect component
- 22mm 1/2in Drive Non-Marring Socket for Volvo - Wilmar (Performance Tool) W32926In Stock+$12.95More info
Product Description
IPD is proud to offer another incredible exclusive item for your Volvo. You might ask why IPD decided to make a magnetic oil drain plug out of billet aluminum? The answer is, why not? IPD enthusiasts will appreciate the quality of this magnetic oil drain plug. Everyone loves parts made from T6061 billet aluminum. We sourced a high-quality rare earth magnet made from the strongest magnetic material: corrosion resistant, high-temperature neodymium. This will give you confidence that your drain plug doesn’t just look cool, but it’s working hard preventing abrasive particles from re-circulating through your oil pump and back into the pressurized system of your engine.
Even though everyone won’t be able to see this trick part on the underside of your Volvo, you’ll know it’s there every-time you service your Volvo’s engine oil. You may also pick up a few tenths in your 0-60mph time due to its lightweight construction. Well maybe not, but that would be cool if it did! All of us at IPD appreciate everyone who sports IPD branded items like this cool magnetic oil drain plug. IPD manufactures this drain plug with a 22mm head (7/8" wrenches will work too).
Additional Keywords: PAN
Additional Technical Information
Due to the material being aluminum and softer than regular steel, most common hand tools and box wrenches can potentially mark or scratch the anodizing on this part. To minimize scratching, use the open end of a 22mm wrench to give you the best contact against the drain plug.
We recommend using the non-marring 22mm 6-point socket in this kit or an 8 AN aluminum wrench to remove the drain plug; think of it as having your own specialty tool kit specifically for changing oil on your Volvo!
DO NOT OVER TIGHTEN THIS OIL DRAIN PLUG WHEN INSTALLING. IPD INCLUDES AN OEM CRUSH WASHER WITH EVERY OIL DRAIN PLUG, SNUG AND HAND TIGHT WILL DO THE TRICK!
Magnetic Oil Drain Plug Specifics:
- T6061 Aluminum
- 22mm head size (7/8" wrenches will work as well)
- Compatible with OE-sized aluminum crush washers for future oil changes, and includes an OEM crush washer in the box
- IPD branded on the head of plug
- Comes in both Blue and Yellow anodized colors
- Incorporates strong neodymium earth magnet
- Recommend using 8 AN aluminum wrench or 22mm non-marring socket to maintain shiny, non scratch anodized finish
Potential Product Fitment Issues
P3 T6 models like the S60, V60, XC60, XC70, and S80 have the turbo's charge air pipe very close to the drain plug, making room for a standard socket very tight, much less for this longer non-marring socket. We recommend a six-point box end wrench or six point short socket for these cars.
About IPD Kit Builder
Our knowledgeable staff has taken all the busy work out of researching products for your project. Inside each Kit Builder are recommended components that are necessary when performing a specific task. The customer now has the power to select each item, catering to their brand preference, budget, and availabiity.
We have Kit Builders for front brakes, rear brakes, front suspension, rear suspension and tune up kits as well.
Technical Tips & Articles
Vehicle Fitment Guide
Policies, Warranty & FAQ
Potential Product Fitment Issues
P3 T6 models like the S60, V60, XC60, XC70, and S80 have the turbo's charge air pipe very close to the drain plug, making room for a standard socket very tight, much less for this longer non-marring socket. We recommend a six-point box end wrench or six point short socket for these cars.
Available to Order means the item may not be in our warehouse but is readily available from one or more supplier warehouses. After you order it, we will get it for you ASAP.
Products from major brand names are almost always in stock in the manufacturer’s domestic warehouse. These suppliers have good fill rates, but even if they are out of stock, we may be able to source it from a variety of alternative wholesale sources.
We are at the most a week away from all these warehouses, usually much less. Does that mean we will always have your product available within that window? Honestly, we can't promise that but we’ll do everything we can to get your parts to you in a timely manner.