Brake Fluid Flush Kit
IPD Kit Builder - K21748
![](https://www.ipdusa.com/Media/45712/Medium/45712.jpg)
Product Description
Brake Bleeding Power for Do-it-Yourselfers!
The Motive power bleeder system allows Do-It-Yourselfers to power bleed brake systems just like the pros without the need of an assistant to pump the brakes. This is important for two reasons. First, it allows the fluid to be bled without the brake pedal going all the way to the floor, which allows the master cylinder piston to travel beyond the normal stroke and can lead to premature failure of the master cylinder. Second, many of today’s newer ABS systems are so intricate that they can only be bled with a power bleeder.
The Motive bleeder is designed for frequent use and has a rugged container and generous 2 qt. fluid capacity, as well as a built-in hand pump and gauge for accurate pressurizing. The system works on the principle of pressurizing the master cylinder so that old brake fluid is forced out of the lines when the bleed screws are opened. The design keeps the master cylinder full of fluid during the process so all you have to do is open a bleed screw until fresh fluid is flowing and then proceed to the next bleeder. This tool makes the task of bleeding brakes or other hydraulic systems an almost effortless, foolproof operation. Gone is the frustration of trying to coordinate pumping the pedal, opening and closing the bleed valve, trying to keep the fluid in the master cylinder at the correct level, and keeping air out of the system.
About IPD Kit Builder
Our knowledgeable staff has taken all the busy work out of researching products for your project. Inside each Kit Builder are recommended components that are necessary when performing a specific task. The customer now has the power to select each item, catering to their brand preference, budget, and availabiity.
We have Kit Builders for front brakes, rear brakes, front suspension, rear suspension and tune up kits as well.
Technical Tips & Articles
Vehicle Fitment Guide
Policies, Warranty & FAQ
Available to Order means the item may not be in our warehouse but is readily available from one or more supplier warehouses. After you order it, we will get it for you ASAP.
Products from major brand names are almost always in stock in the manufacturer’s domestic warehouse. These suppliers have good fill rates, but even if they are out of stock, we may be able to source it from a variety of alternative wholesale sources.
We are at the most a week away from all these warehouses, usually much less. Does that mean we will always have your product available within that window? Honestly, we can't promise that but we’ll do everything we can to get your parts to you in a timely manner.