25mm Wheel Spacer Pair - 240 740 760 780 940 960

If you've searched for wheels for your rear wheel drive Volvo you've likely found that there is a pretty limited selection of aftermarket wheels that will fit your Brick. The selection available for newer, front wheel drive and all wheel drive Volvos while still somewhat limited, is much larger. The bolt pattern on virtually all Volvos from the early 70s until today is the same - 5x108. When Volvo changed to FWD they also changed the offset (how far inboard or outboard the wheel sits on the hub). The difference in offset is roughly 25mm. Adding 25mm spacers to your RWD Volvo will allow you to mount most front wheel drive Volvo wheels on your 200/700/900 series car.

When considering making this change there are many factors to consider. Modification to the wheel wells may still be necessary and offset can vary slightly depending on wheel manufacturer and size. 

Features:

• Hubcentric
• Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
• Hard anodized to ensure a tough, durable finish

NOTE: The wheel studs installed in these spacers are metric thread as are the lugnuts (12x1.5mm). This means direct fit for 700/900 models. 200 series use SAE wheel studs. This means if you want to use these spacers on a 200 series you will use SAE lugnuts (you can reuse the OEM acorn style ones) to fasten the spacers to the hub. You can use the included lug nuts to fasten wheels to spacers. Additionally, if your Volvo still uses the small brake rotor locating bolt/pin it will need to be removed prior to spacer installation.