Adjustable Rear Alignment Kit

We've put together a kit to completely combat rear alignment issues in these models. Our "master" kit includes both our adjustable toe rod kit and our adjustable rear camber bushing kit. 

IPD Adjustable Toe Rod Kit:

It has been common for owners of these cars to struggle with rear tire wear, particularly when the car has been lowered. The problem? The four link suspension has unequal length arms, causing the toe/thrust and camber alignment to be progressively  different as the car travels through its range of motion. Many tuners have pointed to the camber as the wear issue on the car, but we have found the toe (or thrust) to be a far greater contributor to the destruction of your precious Z rated tires.

Many alignment shops will not even check the rear toe of a vehicle unless it is specifically requested. Even when they do check, the elliptical adjustment on the factory link has very limited movement. This is compounded by the non-adjustability of camber on the rear wheels to make your tires squeal with fear (and friction).

Spot checking the cars in our lot showed toe figures that would be considered outrageous if applied to the front wheels. Many of the cars had rear toe issues that were visible to the naked eye. While changing to adjustable toe rods seems extreme on the surface, the installation is so much easier than the alternatives that it becomes the practical option. A fresh alignment after installation produces results that put a smile on your face and keep your tire money in your wallet.

Mild steel brackets with a  6061 T6 aluminum rod that is anodized before powder coating for additional finish durability. Plus, you can never really get enough cool blue parts under your car. Your friends will admire the look and you will know that you are actually saving money.

IPD Rear Camber Bushing Kit:

IPD’s rear camber bushing allows you to adjust for excessive rear camber that can cause premature tire wear and poor braking performance.

Typically excessive negative rear camber occurs when lowering a vehicle via sport springs though some stock vehicles can also require adjustment. Since there is no factory provision for rear camber adjustment IPD has developed an eccentric offset bushing that provides up to 1.5 degree of camber adjustment (negative or positive) to help correct your alignment problems.

The bushing must be pressed into the chassis in a particular orientation to realize the benefits of the design. Installation should be performed by an experienced technician who is familiar with this process and the appropriate tools required to complete it.

Not only can this help alleviate tire wear issues, it can also restore lost braking performance by increasing the contact surface of the tire to the road. Bests results are often obtained in combination with a set of IPD adjustable toe rods to deal with the thrust issue that is also common to lowered vehicles. 

Additional Keywords: CAMBER TOE ADJUSTABILITY

Disclaimer: Performance products sold by IPD have not been tested or approved by any international, federal or local governing agency for street use, thus are designated for non-road or race track use only. Although every effort is made to maintain or improve upon the emissions standards and safety of your Volvo, some of our products may not be legal for street use in your region. IPD makes no claim of fitness or certification for such use and leave it up to you to research the laws of your region.