Turn Signal Lens Assembly Replacement - 850 & 70 Series

Replacing the front turn signal bulb or the front turn signal lens assembly is easier than you think.

Open the hood and look directly behind the light. On the 850 models you will see a spring with a finger ring. Move the wire spring off the body and the lens assembly, it will now pull out toward the front of the car.

On the 70 series behind the lens assembly, you will find a tab, which the flat bladed screwdriver will easily depress. Once depressed the lens assembly will slide forward and out.

To reinstall always check the locating pin on the side and gently push into place until you can refasten the spring on the 850 or until you hear a click on the 70 series.